Eight Channel Mic/Line Mixer with Tone Control
The ART MX821 is a versatile rack mount mixer combining eight independent input channels into a single mono line level mixed output.
Essential features include: XLR mic and 1/4-inch line inputs, individual level and tone controls, switch-selectable +48 Volt phantom power on each channel. Main output is balanced low impedance. An additional pre-fade output and auxiliary buss input jacks allow patching multiple MX821''s together when more channels are needed.
Built in power supply and single high 19-inch rack mount format allows for easy installation and reliable long term operation.
Eight Independent Input Channels. Level and Tone Controls on each Channel. Balanced XLR and 1/4-inch Unbalanced Line Inputs on each Channel. 48 Volt Phantom Power on XLR inputs with DIP Switch for each Channel. Balanced TRS 1/4-inch Main Output Jack with Master Level Control. RCA-type Pre-Fade Output (Not Affected by Master Level Control). RCA-type Aux Buss Input Jack for Channel Expansion. Solid Single High Rack Mount Chassis with Built In Power Supply.
Input Connections:
XLR-F balanced (8),
1/4-inch unbalanced (8),
RCA (1)
Output Connections:
1/4-inch balanced TRS (1),
RCA (1)
Input Impedance:
2K Ohms Mic,
20K Ohms Line,
10K Ohms Aux. Bus In
Output Impedance:
200 Ohms balanced Main Out,
100 Ohms Pre-Fade Out
Maximum Input Level:
-6dBu Mic,
+18dBu Line
Maximum Output Level:
+27dBu balanced,
+21dBu unbalanced
Phantom Power: +48 Volts DC (regulated/low noise)
Maximum Gain: 65dB/39dB mic/line
Signal to Noise Ratio: >90dB typical
THD: <0.01% typical
Equivalent Input Noise -108dBu typical
CMRR: >52dB typical
Phase Shift: <10 degrees, 20Hz - 20kHz
Power Requirements: 120VAC / 50-60Hz, or 230VAC / 50 Hz, 15VA
Dimensions: (HxWxD mm) 44.5 x 483 x 152
Микрофонные входы - XLR, линейные входы 1/4 TRS с индивидуальной
регулировкой уровня и тембра, возможность включения фантомного питания
48V на каждом канале.
Основной выход (Main output) – балансный (разъем 1/4 TRS).
Дополнительные
вспомогательные гнезда («pre-fade output» и «auxiliary buss input»)
позволяют соединять больше MX821 вместе, когда есть необходимость в
большем количестве каналов.