DescriptionThe T-6715 is a IP intercom control unit for a economy solution, which is separate the network audio adapter and intercom panel, thus each adapter could connect eight intercom panels to save cost. It is very reliable industrial two way communication system for bank, prison, hospital, school, mining plant, transportation center, airport, metro or subway. In a real applications, there will be several network paging microphone T-6702 shall used as duty service for reception desk, information desk, security office, nurse room or logistic center. Each duty network paging microphone will be ID address distinguished by its own IP address, so one duty network paging microphone shall be responsible to answer and supervise several IP intercom panel T-6716 or T-6717.
Under emergency or information inquiry, the IP intercom panel can press button to call to its predesignated duty microphone, the duty microphone can answer or reject the call. If the pre-designated duty microphone is long time no answer or busy, the secondary duty microphone will be automatically transferred. Every ring call is accompanied with warning chime tone and flashing indicator. While the duty microphone with could directly make announcement or send pre-recorded messages to the IP intercom panel to warning the potential emergency which may be saw from CCTV system.
The IP intercom system is built-in dual CPU to ensure minimum sound delay. Moreover, special circuit protection is adopted to avoid echo noise within this metal box. The IP intercom control unit is built-in a decoder which is used to decode aux and control data into analog to internal amplifier and external speaker. This IP intercom control unit could be installed in anywhere of non-dedicated network system, so can help to save wiring cost. Each intercom units capacity of connect eight intercom panels. The IP intercom control unit is built-in a stereo 10W+10W amplifier and it is also designed of a local aux input and also aux output which could be used to connect with an external amplifier. The IP intercom control unit is also with two dry contacts inputs and two dry contact outputs to interwork with third party low voltage system like CCTV, door access system and home automation system. Status indicator will be light in different color for paging, intercom and voice alarm system. DC 12V to 24V safe power supplied system.
Features* Two way communication control panel for economy intercom solution
* Ideal communication system for bank, prison, hospital, school, mining plant, transportation center, airport, metro or subway.
* Full IP/TCP network audio system which could be set up over non-dedicated network system
* Ring call to duty microphone and automatically transfer function when no answer or busy
* Each intercom control unit capacity of connection with eight intercom panels by hand-in-hand connection
* Max communication distance up to 1.2kms
* Built-in a stereo 10W+10W amplifier
* Local microphone and aux input for its own zone use
* One aux output to connect with external amplifier
* Two dry contact inputs and two dry contact outputs to inter-work with third party system
* Safe DC 12V-24V power supply system
* Minimum data delay and no echo noise
Network Interface: Standard RJ45 input
Communication Protocol: TCP/IP, UDP, IGMP
Audio Format: MP3/MP2
Sampling Rate: 8K~48KHz
Transmission Speed: 100Mbps
Audio Mode: 16-bit stereo CD sound level
Frequency Response: 20Hz~20KHz (+1dB,-3dB)
S/N Ratio: 85dB
Aux Input: 350mV
Mic Input: 5mV, phone jack type
Power Output & Impedance: 10W+10W, 8
Contack Input: Two dry contack inputs
Contack Output: Two outputs,Max 3A/120V dry contack outpt
Power Consumption: 30W